150L Indirect Telford Tempest Vertical Unvented Cylinder TSMI150
Stock code: CCT150I
Need help selecting the right product?
Call our expert support team on 01622 716 758
Ask a question about the product
150L Indirect Telford Tempest Vertical Unvented Cylinder TSMI150
Comes complete with expansion vessel and kit
- Manufactured From 2304 Duplex Stainless Steel - Developed specifically for it's anti-corrosive properties.
- Pressure Tested to 15 Bar - Total Peace of Mind.
- Relief Valve Operates at 7 Bar / 90-95 degree - Safety Control.
- 3 Bar Working Pressure - Able to meet the toughest demands.
- 22mm Domestic and Primary Connections - High flow rates and recovery time.
- Up to 55 litres / Minute Flow Rate - Capable of operating the most demanding showers.
- 26 Units to Choose From - Choose a unit best suited to your requirements
More Technical Information Click Here
| Bedrooms | Hot Water Demand | Indirect | Direct |
| Up to 2 beds | 1 Shower | 90 LTR | 125 LTR |
| 1 Bath, 1 Shower | 125 LTR | 150 LTR | |
| Up to 3 beds | 1 Bath, 1 Shower | 150 LTR | 170 LTR |
| Up to 4 beds | 1 Bath, 1 Shower | 170 LTR | 200 LTR |
| 2 Baths, 1 Shower | 200 LTR | 250 LTR | |
| 2 Baths, 1 Shower | 250 LTR | 300 LTR | |
| Up to 6 beds | 2 Baths, 2 Showers | 300 LTR | 300 LTR |
| 3 Baths | 300 LTR | 300 LTR |
The above chart is for guidance only.
Lifetime Warranty on this 150L Indirect Telford Tempest*
2 Year Warranty on Component arts
*Cylinder must be serviced every 12 months to apply
|
Parts supplied |
|
Dual High Limit Stat |
|
3Kw Immersion Heater 240V single Phase |
|
Expansion Vessel |
|
Temperature & Pressure Relief |
|
3Bar Inlet Control Group |
|
Two port motorized valve |
KEPT IN STOCK. FREE NEXT DAY DELIVERY IF ORDERED BEFORE 2.30PM
For Collection - £ 0.00
Same Day
NEXT WORKING DAY IF ORDERED BY 2.30PM - £ 0.00
TDL WILL CONTACT YOU IF NOT NEXT DAY
For more information, please see our delivery information page.
Call for expert advice:
01622 716 758