Confirm Deletion
Are you sure you want to delete this product from cart?
Stock code: TSMI300/HP
Size
: Height-1650 Diameter-580
Call our expert support team on 01622 716 758
Acetal tundish, Inlet control group, two port valve, external expansion vessel with bracket, dual probe thermostat, temperature & pressure relief valve*, 3kW immersion heater(s)*
*Factory-fitted
With developers using more renewable energy sources than ever before, the Tempest Heat Pump is now available to be used with Air/Ground source heat pumps. This version is available in single coil where Heat Pump is the only heat source and Twin Coil where solar or a boiler is also available.
As with all ranges of our Tempest we are so confident in the construction that we have given the Tempest Heat Pump a lifetime warranty.
Telford's standard Heat Pump coil has a surface area of 3.3m2, as a result the smallest tank we can offer is a 200litre. Smaller capacity cylinders are available where a lower surface area coil can be used.
- Easy to install
- Pressure test to 15 bar
- 3 bar working pressure
- Flow rate up to 55ltrs/min
- Indirect and Twin Coil versions
- Stylish appearance
- Lifetime guarantee
Cap (LTR) | 170 | 200 | 250 | 300 | 400 | 500 |
Height | 1200 | 1500 | 1800 | 1650 | 1590 | 1835 |
Diameter | 510 | 510 | 510 | 580 | 710 | 710 |
A | 173 | 173 | 173 | 201 | 240 | 240 |
B | 373 | 223 | 423 | 301 | 555 | 540 |
C | 523 | 670 | 723 | 801 | 740 | 740 |
D | 623 | 770 | 873 | 901 | 840 | 890 |
E | 923 | 1123 | 1473 | 1261 | 1240 | 1390 |
F | 1023 | 1323 | 1624 | 1441 | 1340 | 1570 |
Cap (L) | 170 Ltr | 200 Ltr | 250 Ltr | 300 Ltr | 400 Ltr | 500 Ltr |
ERP Band | C | C | C | C | C | C |
Immersion Heater | 1 x 3Kw 240v single phase | 1 x 3Kw 240v single phase | 1 x 3Kw 240v single phase | 1 x 3Kw 240v single phase | 1 x 3Kw 240v single phase | 1 x 3Kw 240v single phase |
Standing Heat Loss | 1.94kwh/24hrs | 2.04kwh/24hrs | 2.16kwh/24hrs | 2.32kwh/24hrs | 2.58kwh/24hrs | 2.81kwh/24hrs |
Heat Pump Coil Surface Area (m2) | 2 | 3.3 | 3.3 | 3.3 | 3.3 | 3.3 |
Foam Information |
ODP Ozone Depletion potential = 0 |
GWP Global Warning Potential = 2.2 |
Foam Type = Polyurethane |
British Standard 1566, D: 2002 |
Parts Supplied |
Dual High Limit Stat |
3Kw Immersion Heater 240V single Phase |
Expansion Vessel |
7Bar Temperature & Pressure Relief |
3Bar Inlet Control Group |
2 Port Motorised Valve |
Connection Sizes | |
120-300 | H/P Coil |
120-300 | All other connections 22mm compression |
400-500 | 1" Female BSP |
| Size | Height-1650 Diameter-580 |
Call or email to check Delivery dates if Urgently required
These are special order cylinders that we order direct from supplier so we need to check with them how quickly they can be supplied. Usually 2-15 Working Days depending on which Cylinder you have Ordered. We will always do our best to work with our suppliers to deliver your order as soon as possible.
TDL will contact you to confirm a delivery date by email.
TDL may not deliver certain goods or there may be additional charges if delivering products to the following areas:
TDL urge any customer from any of the above areas to contact us directly so we can advise and give the best service possible to get your order to you.
*POSTCODES - IV, KW1-KW14, PA34, PA, PH, PH41, AB, DD, FK, KA, KY, LD, LL, ML, PL, SA, SY, TD, TQ, TR DELIVERIES HAVE AN ADDITIONAL SHIPPING CHARGE ON PALLET AND PARCEL DELIVERIES.
**PLEASE CHECK WITH YOUR INSTALLER THAT YOU ARE PURCHASING THE CORRECT CYLINDER YOU NEED
INCORRECTLY ORDERED CYLINDERS WILL INCUR A RESTOCKING CHARGE (25%) AND A COLLECTION COST (£60)
DOUBLE CHECK THAT YOU ARE ORDERING THE CORRECT CYLINDER TO AVOID THESE CHARGES**
Call for expert advice:
01622 716 758