BoilerMate SP - BMSTSP210

Boilermate Cylinders are sent direct from the manufacturer. Lead time for these cylinders would normally be 15 working days.

Mains pressure hot water thermal store for use with central plant boilers

The BoilerMate SP Pre-Plumbed offers a ‘plug n play’ solution, featuring a pre-plumbed kit to help reduce installation time and standardise plumbing configuration across multiple dwelling sites.

Part of the BoilerMate SP range, the BoilerMate SP Pre-Plumbed is the perfect partner for central plant heating systems. Its main benefits for the installer or the developer include:

• Reduction in pipe size
• Reduction in the central plant size
• Built in diversity
• A fitting template to speed up installations
• No G3 qualification requirement for installation

The BoilerMate SP Pre-Plumbed thermal stores also provides the homeowner with:

• Mains pressure hot water giving ‘power shower’ performance
• A cylinder reheat time of approximately 20-25 minutes
• Allows for dry roof space eliminating the risk of freezing pipes/tanks in winter
• No annual maintenance or safety check requirement
• Increased system efficiency, reducing running costs

Easy to install, the BoilerMate SP Pre-Plumbed can be fitted to existing systems, with no requirement for pipework oversizing.

As it is vented and therefore inherently safe, there is no requirement for a safety discharge, and therefore is not subject to G3 Building Control Regulations – thus simplifying installation and system maintenance enormously for the landlords or homeowners.

BoilerMate SP Pre-Plumbed models are designed to be fed directly from the mains. With the water being instantaneously heated via the plate heat exchanger, this removes any risk of legionella.