QUINN RADIATORS

Choose  the height of your Quinn Compact radiator from the selection on the left 

Product Range
The Quinn Compact Radiator range comprises of single, double and double panel plus Quinn convector radiators supplied with factory fitted grilles and side panels in a choice of five heights with lengths from 400mm to 2000mm.
Outputs
All Quinn radiators have been manufactured and tested in accordance with BSEN 442.
Finish
Every Quinn Compact radiator undergoes an intensive pre-treatment process to protect against rust. The radiators are then finished with Epoxy Polyester Powder paint similar to RAL 9016 which may be overpainted if required.
Packaging
Every Quinn radiator is protected top and bottom over the whole length and height with heavy cardboard box ends and packed in shrink wrapped polythene.
Quality
All Quinn radiators are manufactured under a BS EN ISO 9001:2000 quality system accepted by BSI.
Warranty
All Quinn radiators are supplied under warranty for a period of 5 years in respect to defective materials or manufacture.
Connections
Each Compact Quinn radiator is manufactured with four 1/2" BSP TBOE connections.
Testing
All Quinn radiators are individually pressure tested to 10.5 bar and are suited for a working pressure up to 8 bar.
Brackets and Bracket Lugs
All Quinn radiators in the range are supplied with two or more brackets depending on the length. Two pairs of bracket lugs are fitted on radiators up to and including 1600mm long. A third pair of lugs are fitted centrally on radiators 1800mm long and over.
Tapping-To-Tapping Dimensions
All tapping-to-tapping dimensions may be obtained by subtracting 5mm (1/4") from the nominal radiator length (accurate to + 2mm).
Materials
Quinn Compact radiators are manufacured from high quality cold-rolled steel with a nominal thickness of 1.2mm.
Installation
For indirect systems or closed circuits only at a working pressure not exceeding 10 bar.
Water Treatment
It is strongly recommended on completion of the installation, the system should be properly flushed and
filled-in accordance with the British Standard Code of-Practice for the Treatment of Water in Domestic Hot Water Central Heating Systems Bs 7593. Use of corrosion-inhibitor is strongly recommended. Failure to observe this recommendation will invalidate the manufacurers warranty.
Conditions of Sale
The Quinn standard conditions of sale apply to all transactions. A copy is available on request.